It takes a few ounces per acre of a herbicide containing glyphosate to kill the weed downy brome. At least, it’s supposed to But when a farmer sent a sample of the weed to Washington State University professor Ian Burke’s lab, researchers determined it would take seven times the maximum label rate of the herbicide to kill it.
That’s an extreme example of a problem that’s become more serious in recent years: herbicide resistance in weeds. For decades, farmers have relied on an array of herbicides to get rid of weeds that compete with their crops and drastically reduce
Herbicides
yields. Now, through repeated use of those chemicals, the weeds are developing resistance to them.
According to the Weed Science Society of America, once a weed population is exposed to a herbicide to which one or more plants are naturally resistant, the herbicide kills susceptible individuals, but the resistant ones survive and reproduce.
With repeated herbicide use, resistant weeds that initially appeared as isolated plants can spread to dominate the field.
Weeds are the most destructive factor farmers face, Burke said.
“Every year, a weed problem can take all of your wheat if you don’t do anything about it,” he said.
A farmer may tell Burke that he used a particular product, but it stopped working. So he switched to another one. When that one stopped working, he moved to another.
Farmers might think, “If it’s working, stick with it until it doesn’t work,” said Drew Lyon, another WSU weed science professor.
“That’s one of the reasons we’re in this mess we’re in,” he said. “We found a herbicide that worked, and we stuck with it until it didn’t work anymore.”
Economically Injure:
Herbicide resistance increases growers’ chemical costs by 30-40% as they try to maintain weed control, said Brit Ausman, an Asotin, Wash., farmer and Washington Grain Commission board member.
This is a growing issue that is going to become economically crippling, and we’ve got to figure out some answers, Ausman said. It’s a different weed in almost each geographic location that is showing signs of herbicide resistance.
In the West, resistance is most prevalent in a rogue’s gallery of weeds: downy brome, Italian ryegrass, mayweed chamomile, prickly lettuce, wild oat, Russian thistle, and mustard weed species.
If a farmer has one or more of those weeds, they’re likely resistant to something, Burke said. In a few pockets, the weeds are resistant to most registered herbicides, he said.
Method of Use :
When a farmer suspects or confirms resistance to one herbicide, the first thing he does is rotate to another with a different mode of action — the biochemical process that kills the weed, said Steve Riggers, a farmer in the Nezperce and Craigmont, Idaho, area.
“If you lose one mode of action, you may be very limited as to what you can grow and what other options you have,” Riggers said. “If you have a weed that’s resistant to multiple modes of action … then you’ve really backed yourself into a corner.”
Weeds resistant to more than one mode of action are becoming more common, Burke, the WSU weed scientist, said.
“(Resistance to) two modes of action is alarming,” he said. “Certain palmer amaranth and rigid ryegrass biotypes have resistance to six modes of action.”
The problem is not confined to any one region. It is even greater in the Midwest and exists as far away as Australia, Lyon and Riggers said.
Using two modes of action on the same weed works in theory, Burke said, as it’s difficult for a weed to develop resistance to both at the same time.
But not every herbicide lasts the same amount of time, and mixtures aren’t always compatible.
“One of the problems is, we came to that too late,” Lyon said. “Coming in with two modes of action that are still effective would have been a great idea before we developed the problem.”
Working :
In wheat, farmers should manage weeds with products that currently work, such as BASF’s Clearfield technology and Zidua, FMC’s Anthem Flex, Albaugh’s CoAXium wheat system, and Syngenta’s Talinor, and make sure they remain effective for as long as possible, Lyon said.
Part of the problem is when herbicide companies develop new products, wheat isn’t a high priority for investment compared to corn, soybeans, cotton, and rice, Burke and Lyon said.
“All the easy stuff’s been found,” Lyon said. “I think a lot of growers still believe something’s going to come along, a silver bullet to keep them going the way they’ve been going, and that’s not likely.”
Wheat remains a priority crop, the companies that produce the herbicides say.
“We have not forgotten about wheat,” said Kirk Sager, FMC technical support manager in Ephrata, Wash
However, a new mode of action hasn’t been discovered and introduced into the market, for any crop, for more than 25 years.
“That hasn’t been for lack of effort,” said Curtis Rainbolt, technical service representative for BASF in Boise, Idaho. His company actively screens for new herbicide candidates. Some new herbicides have also been developed using existing modes of action.
Many factors go into developing a new active ingredient and bringing it to market, said Chris Clemens, an agronomy service manager for Syngenta.
“Bringing one new crop protection product to market costs about $286 million and takes 11 years of research and development,” Clemens said.
Researchers look for the lowest use rate that will enable the active ingredient to remain effective, while producing the highest possible profit margin for the grower, he said.
Instruction :
Syngenta emphasizes best management practices to reduce the weed seed bank, Clemens sai
The Environmental Protection Agency recently began requiring companies to have a stewardship program in place as part of product registration, said Chad Shelton, global director of proprietary technologies for Albaugh, based in Rosalia, Wash.
Albaugh offers training at the ag retailer, grower and seed retailer levels, Shelton said.
He compared weed control products to other tools in the toolbox.
“Every person that owns a crescent wrench has been tempted to use that crescent wrench as a hammer,” he said. “And if you use that crescent wrench as a hammer, the next time you pull it out of your toolbox … it will no longer work the way it was designed.”
FMC recommends using the highest rate allowed by the label to cover the entire germination window and minimize escapes.
“Don’t cut rates to save money,” Sager said. “Every escape you have by using a low rate has the potential to be resistant.”
Rainbolt said growers must consider every available tool, even in the face of low wheat prices.
Using an additional herbicide with another mode of action may increase the short-term cost, but it will have a long-term benefit, he said.
Growers should also rotate crops, chemistries, modes of action and use products on the crop they need most — not every crop every year, Sager said.
“Every chemistry out there, they’re all at risk if we abuse them,” he said.
Examination:
It used to be that half of the weed samples tested at WSU were not resistant, Lyon said. Now, “a good share” are, and to several herbicides.
Researchers check whether a weed can still be effectively controlled within the label use rate, but that’s relatively rare, Burke said.
Burke usually receives 70 to 100 weed samples a year. He advises patience. It takes nine months to a year to grow a plant out and spray it to determine resistance.
Having confirmation of resistance is good, but action is best, he said.
If resistance is likely — meaning there wasn’t some other problem with the herbicide application — the farmer should mow, till or pull the weeds or do whatever they can to make sure no seed is produced, Lyon said.
Farmland Alternatives :
Many farmers use no-till practices in which plowing is kept to a minimum. Benefits include reduced erosion and improved soil health and better air and water quality, according to the Pacific Northwest Direct Seed Association.
Glyphosate is a non-selective and cost-effective herbicide that has been substituted for Farmland to control weeds in no-till farming, Lyon said. It has allowed farmers to reduce or eliminate Farmland and thereby greatly reduce soil erosion and improve soil health.
But adding tillage to control weeds could impact a farmer’s ability to be certified in the Farmed Smart sustainable agriculture program, said Ty Meyer, association executive director.
The association suggests solutions that don’t include heavy tillage but rely instead on crop rotation, cover crops and education to avoid establishing herbicide resistance in weeds, Meyer said.
Many soil conservation gains from reduced Farmland are at risk, Burke said.
“We’ve done that on the back of herbicides,” Burke said.
Herbicide Alternatives :
Farmers should change crop rotations, add occasional tillage and plant earlier or later to avoid promoting weeds that emerge at specific times, Burke and Lyon said.
New alternative crops are part of the good news, but are still not as economically viable as winter wheat, Lyon said.
Adding forages for livestock, such as alfalfa, would reduce the weed seed bank. Allowing livestock grazing would eliminate the cost of cutting and hauling the forage crop, Lyon said.
Also, BASF recently invested in a hybrid wheat production program, slated to be available in the mid-2020s, in which the crop may be more competitive against weeds, Rainbolt said.
New generation :
The “golden age” of herbicides has ended, WSU’s Lyon said. The New generation will look a lot like the old one, but herbicides won’t be relied on so heavily, he said.
“In the 1960s and 1970s, if you got 70% control out of a herbicide, you were pretty happy with that,” Lyon said. “Then in the 1980s, 1990s and 2010s, you’re looking for 95%-plus or you don’t think it’s working very well. I think we’re going to go back to a day where you just can’t count on the herbicide to do the whole job for you.”
“The old days of driving by your field and saying, ‘I guess I’ll go out and spray some 2,4-D on my weeds,’ are long gone,” Riggers, the Idaho farmer, said. “It’s much more complicated now.”
Riggers said growers will find ways to manage around the problem, but he worries about the damage done in the meantime.
“I really believe there will be farms that aren’t able to get on top of this,” he said. “It will be too late and they’ll get to a point where economically it makes it very tough to survive.”
